● Flux cored wire for self-shielded metal arc hardfacing
● Austenitic deposit with excellent work hardening properties
● Highly resistant to impact and high pressures
Other packaging and other diameters: Available upon request.
Welding products and techniques evolve constantly. All descriptions, illustrations and properties given in this data sheet are subject to change without notice and can only be considered as suitable for general guidance. This document is intended to help the user make the correct choice of product. It is his responsibility to assess its suitability for his intended application.
Packaging
Diameter (mm)
1.6
2.4
2.8
Standard packaging
Coil/Drum
Coil/Drum
Coil/Drum
Weight
15kg / 250kg
50kg / 250kg
50kg / 250kg
Frequently Asked Questions
What is the standard classification code for this welding product?
According to the EN14700 specification, the classification code for this welding wire is T Z Fe9.
What are the hardness values of the weld metal?
The typical 3-layer deposit hardness is 210-240 HB (21-25 HRC) in the as-welded condition, and it can reach 45-55 HRC when work-hardened.
What is the typical microstructure of the deposited metal?
The deposited weld metal has an austenite microstructure, offering high performance and toughness.
Can the deposited weld metal be cut using oxyacetylene?
No, the deposited metal cannot be cut with a flame (cannot be flame out). Machining should be performed by grinding only.
What are the available packaging options?
Standard packaging includes Coils and Drums. Standard weights are 15kg or 250kg for 1.6mm wire, and 50kg or 250kg for 2.4mm and 2.8mm wires. Other custom sizes can be provided upon request.
Runxing machinery
